Also I wasn't brave enough to rev it above 4000rpm in 3rd in the auto box. It was approximately 7deg C when doing the test and the coolant temp didn't seem to want to go above 85deg C. Hi Martin,just got back from doing those logs. Does not work with 06A 906 018 FA (2000 US 2. For controllers using the UDS/ODX/ASAM protocol, the Measuring Blocks function is not available and you MUST use Advanced Measuring Blocks instead. Over a decade of leadership in aftermarket. Re: Vcds measure blocks for dummies 17-04-2012, 06:53 PM. VAG-COM Measuring Block AGU Engine Label file. Someone more knowledgeable could also helpīTW, i needed to check the O2 sensor for my MOT because I was getting totally wrong values on the emission test.It was all sorted in the end.(MAF wasn't connected.hehe) Hope this helps.I've highlighted the blocks I needed to check the lambda. Find and Open the Log file in Windows Explorer Graph MAF actual -vs- rpm in Excel The MAF is OK if the actual value is at least 850-900 mg/h at 3000 rpm. ![]() This is what I used for the AGU (it doesn't have measuring block 032 for the AGU): Air system part I: MAF Go into Engine measuring block 003 Start Logging data In a high gear (4th/5th), give full throttle from 2500 rpm up to 3500rpm.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |